The AF-TPR2A modules are two-pair audio receiving modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equipment. The D- and DS- models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPR2A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DS-TPR2A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations. The AF-TPR2A is an APPFLEX series product that is compatible with various APPFLEX wall-mount, cabinet-mount and tabletop enclosures. The EM-TPR2A is a 45mm square module that fits the European Modular mounting frames and cover plates. European electrical boxes are not sufficiently deep to accommodate RJ45 jacks and plugs, therefore the EM- products connect to the twisted pair cable through a detachable terminal block.
- Two Unbalanced -10 dBV Phono Jack Audio Outputs
- L (Left) Output From Pair B; R (Right) From Pair C
- Signal and Power Pair Pass-Through on RJ45s
- Remote Powering through Twisted Pair Cable
- Fused Local Power Feeds all Connected Modules
- Local Power Input on Terminal Block
- Blue LED Indicates Module is Powered
- Daisy-Chain with Additional Format-A Receivers
- Studio-Quality Precision Active Balanced Circuitry
-
Operating Temperature (Maximum) :
55 C
-
Operating Temperature (Maximum) :
131 F
-
Operating Temperature (Minimum) :
0 C
-
Operating Temperature (Minimum) :
32 F
-
Total Harmonic Distortion + Noise (THD+N) :
0.01 %
-
Depth :
1.89 in
-
Depth :
48.01 mm
-
Height :
2.77 in
-
Height :
70.36 mm
-
Width :
2.22 in
-
Width :
56.39 mm
-
Shipping Weight :
0.35 lbs
-
Shipping Weight :
0.16 kg
-
INPUT :
RDL FORMAT-A
-
Input Connection :
RJ45 (Models D-, DS-, AF-); Detachable Terminal Block (Model EM-)
-
Format-A Signal Pairs Used (2) :
B (Left); C (Right)
-
Format-A Output :
RJ45 (not applicable to EM-)
-
Output :
100 ohm unbalanced
-
Output Connection :
RCA Phono
-
Noise below +4 dBu :
< -90 dB
-
Crosstalk :
< 90 dB (1 kHz); <75 dB (20 Hz to 20 kHz)
-
Headroom above +4 dBu :
> 18 dB
-
CMRR :
> 80 dB (50 Hz to 150 Hz)
-
Indicator :
Power In
-
Power Connections (2) :
Detachable terminal block; RJ45
-
Power Requirement :
24 Vdc @ 45 mA plus connected loads
-
Mounting Box Minimum Depth :
2.4inch
Related Products
-
AF-TPR1A
Active Single-Pair Receiver - Twisted Pair Format-A - APPFLEX - XLR mic/line output
-
AF-TPR3A
Active Three-Pair Receiver - Twisted Pair Format-A - APPFLEX - XLR and stereo phono outputs
-
AF-TPS1A
Active Single-Pair Sender - Twisted Pair Format-A - APPFLEX - XLR mic input w phantom
-
AF-TPS2A
Active Two-Pair Sender - Twisted Pair Format-A -APPFLEX - Stereo Phono Jack Inputs
-
AF-TPS3A
Active Three-Pair Sender - Twisted Pair Format-A - APPFLEX - XLR mic & stereo phono in
-
D-TPR1A
Active Single-Pair Receiver - Twisted Pair Format-A - XLR mic/line output
-
DS-TPR1A
Active Single-Pair Receiver - Twisted Pair Format-A - Stainless - XLR mic/line output
-
DS-TPR3A
Active Three-Pair Receiver - Twisted Pair Format-A - Stainless - XLR & stereo phono out
-
EM-TPR1A
Active Single Pair Receiver-Twisted Pair Format-A 45mm,XLR Microphone/Line output
-
FP-TP4PW
Power Inserter - Twisted Pair - Four Sets of Outputs - Signal Loop-through
-
FP-TPX3A
Format-A Twisted Pair Remote Controlled Mixer
-
RU-TP4PW
Power Inserter - Twisted Pair - four sets of outputs - signal loop-through
-
RU-TPDA
Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs
-
RU-TPS4A
Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs
-
TP-HA1A
TP-HA1A Format-A Stereo Headphone Amplifier
-
AFM-A1
Wall Mount Adapter Plate for APPFLEX Module - Ultrastyle
-
AFM-DC1
Desktop Chassis for APPFLEX Module - Ultrastyle gray
-
AFM-DC2
Desktop Chassis for 2 APPFLEX Modules - Ultrastyle gray